Contact Us
Symptoms
The “Run on Startup” setting is activated in the Hub, but is not executed at startup as expected.
Verification Steps
Make sure to check if the entry is in the Windows Task Scheduler, to make sure it was created and set correctly.
One cause could be that the start entry is set with a different user than the current one being used.
Solution
Disable “Run on Startup” in PIXERA hub, then re-enable it again after a second. This should change the task scheduler entry to the correct one.
You can also manually change the user that is tied to the Windows Task Scheduler event.
PIXERA hub 2.15.4 | 2. April 2025 | CL