Contact Us
Contact Us

CATEGORIES

IN THIS ARTICLE

    Pixera Hardware

    Pixera Software

    Pixera Control

    Everything about Pixera Control

    Pixera 2.0

    Learn more about all the new features

    Pixera Hub

    Knowledge about Pixera Hub

    Whoops…Nothing found

    Try other keywords in your search

    Back to home page   or   Open a ticket

    CATEGORIES

    IN THIS ARTICLE

      Defining Audio Channels

       0 Minutes

       1 Like

       1451 Views

      Defining Audio Channels

      Audio output is defined on a layer basis by setting the Audio Base Channel in the Inspector. The Audio Base Channel represents the first channel. If a media file or live input contains more than one audio channel the next channels are routed to the subsequent channels on the same output device.

      Delete

      Example: Selecting channel 1 as Audio Base Channel for a layer and placing an audio clip with two channels of audio on that layer will output the two audio channels from the clip on the selected audio device's channels 1 and 2.


      Delete

      Note: Pixera currently only supports mono or stereo signals. Audio content has to be placed as separate audio clips on the Timeline. Audio embedded in video files is also not yet supported.


      The setting for the Audio Base Channel can be found in the Inspector after selecting the layer in the Timeline.

      Please note, that the audio device is set up in the Settings menu accessible via the gear icon on the top right of the user interface.

      Was this article helpful?